Glow Graffiti Shadow Wall

Glow Graffiti Shadow Wall

Create shapes, patterns, shadows and silhouettes with the Nova Glow Grafitti Shadow Wall that will illuminate your creations in the dark.

Glow Graffiti Shadow Wall

Please watch the video above - it's better seen for real!

Using the latest glow in the dark technology the 'Novaglow Glow Graffiti Shadow Wall' allows you to write & paint with light that can be used again and again for many years. With a self adhesive backing it is easy to stick it to any clean, flat surface, turn out the lights, grab a light & your'e ready to play! 'Paint' in bright glowing green using a torch (why not use a torch app on your iPhone?!) or use a camera flash to create shadows or silhouettes. The glow will slowly fade allowing you to 'paint' on it again

** Free UV Keyring Torch

This industrial grade photoluminescent self adhesive vinyl is used in glow in the dark safety signs in buildings & glow strips found in airplanes - it can be cut into strips or shapes of your choice. It can be stuck onto items such as steps, light switches, door knobs, etc etc - anything you want to glow in the dark. It is ideal for arts & crafts projects and sign writing.

PAINT WITH LIGHT

You will need a bright light of some description - we have added some UV torches & lasers above that work best with this material - but you can also use your iPhone torch app, a real torch or a bright keyring torch

• Thick professional grade photoluminescent vinyl
• Use over & over again
• Self adhesive
• Robust vinyl
• Lasts for years

Available in three sizes:

• Small - 50cm x 50cm
• Medium - 100cm x 100cm
• Large - 100cm x 200cm

CREATE SHADOWS & SILHOUETTES

Sometimes seen in museums & indoor play areas known as 'shadow walls' - these are usually accompanied by an automatic flash. Instructions tell you to stand against the wall, the flash goes off and in the dim light a silhouette or shadow is shown with the exposed areas glowing brightly. This product is suitable for both commercial and domestic use and is premium grade photoluminescent vinyl

Applying to walls:

The vinyl has a self adhesive backing that will stick to most flat surfaces such as painted walls. However, you will need to thoroughly clean any surfaces to ensure the vinyl sticks properly. If your surface is not suitable we recommend that you apply the vinyl to a piece of hardboard or MDF & then affix to the wall. If the product will be used frequently, such as a commercial application, we recommend that it is covered with clear perspex or safety glass to protect the surface of the vinyl.

INSTRUCTIONS

You will need:

• 2 people
• A dry, clean, soft cloth
• Tape measure & pencil (if you need to get it level)

1. Clean the surface
2. Peal back the top 2-3" of the backing & ensure the top is level
3. Smooth out any airbubbles from under the stuck vinyl
4. Slowly peel away the backing while smoothing any air bubbles out as you move downward

This product will not stick to:

• Rough or uneven surfaces
• Raised textured wallpaper such as anaglypta
• Dirty surfaces
• Some materials & surfaces that repell adhesives

If you are unsure that this product will stick properly we recommend that you cut a small strip, apply to the surface & leave for a day or two to see if it is firmly stuck or if it starts to peel at the edges. You may wish to apply the vinyl to some hardboard/MDF and then fix the board to the wall.

* Please note that red or green light (including lasers) will not make this glow